Cartridge S410G 14879880032 A0090961199 Mercedes-Benz AXOR 2

If there is an oil deflector in your turbocharger model, that goes on next and then the insert. Use high quality grease on the O-ring for the insert. This should be placed with hand pressure only. It may take some significant pressure but it is advisable not to use a mallet. Once seated carefully install the snap ring that holds the insert in place.

Install your balance checked compressor wheel onto the shaft and then place the compressor wheel nut on the shaft. If your compressor wheel nut has a self-locking thread that does not allow you to run the nut down by hand, use your wrench to bring the nut down to just barely touch the nose of the compressor wheel to hold all the components together, but not too tight yet. Raise the CHRA assembly out of the turbine housing and be sure to position the wheels one to the other from your marks to ensure proper balance positioning. Once in place, put the bearing housing back into the turbine housing.